Author: Carwardine, J.
Paper Title Page
MOPG06 First Beam Tests of the APS MBA Upgrade Orbit Feedback Controller 39
  • N. Sereno, N.D. Arnold, A.R. Brill, H. Bui, J. Carwardine, G. Decker, B. Deriy, L. Emery, R.I. Farnsworth, T. Fors, R.T. Keane, F. Lenkszus, R.M. Lill, D.R. Paskvan, A.F. Pietryla, H. Shang, S.E. Shoaf, S. Veseli, J. Wang, S. Xu, B.X. Yang
    ANL, Argonne, Illinois, USA
  Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357
The new orbit feedback system required for the APS multi-bend acromat (MBA) ring must meet challenging beam stability requirements. The AC stability requirement is to correct rms beam motion to 10 \% the rms beam size at the insertion device source points from 0.01 to 1000 Hz. The vertical plane represents the biggest challenge for AC stability which is required to be 400 nm rms for a 4 micron vertical beam size. In addition long term drift over a period of 7 days is required to be 1 micron or less at insertion device BPMs and 2 microns for arc bpms. We present test results of the MBA prototype orbit feedback controller (FBC) in the APS storage ring. In this test, four insertion device BPMs were configured to send data to the FBC for processing into four fast corrector setpoints. The configuration of four bpms and four fast correctors creates a 4-bump and the configuration of fast correctors is similar to what will be implemented in the MBA ring. We report on performance benefits of increasing the sampling rate by a factor of 15 to 22.6 kHz over the existing APS orbit feedback system, limitations due to existing storage ring hardware and MBA orbit feedback design.
poster icon Poster MOPG06 [6.490 MB]  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-MOPG06  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)